Chromag Bikes

  • Frames
    • Samurai
    • Sakura
    • Stylus
    • Monk
  • Bars
    • Fubars OSX
    • Fubars OS
    • Fubars Acute
  • Stems
    • Ranger
    • Director
  • Saddles
    • Trailmaster
    • Trailmaster DT
    • Lynx
    • Lynx DT
    • Juniper
    • Snipe
    • Overture
  • Clamps
    • Seat QR
    • Wheel Skewer
  • Seatposts
    • Minimalist
  • Products
  • About Us
  • Dealers/Links
  • Shop
  • Blog
  • Newsletter
  • Contact
  • Press
Products > Frames > Monk

Monk

Monk
Monk1
Monk2

Description

Dirtjump/Pumptrack/Street

The Monk is a pure dirt-jump, pump-track bike that features a low slung compact geometry with short stays for quick handling.  Horizontal dropouts with our unique configuration make for easy singlespeed setup.


Features:

  • Tough 4130 tubeset
  • Clean dedicated dirt jump / pump track geometry
  • CNC dropouts with stainless inserts
  • Machined detail at seattube, stay yoke, and headtube
  • Short chainstay range starting at 15.6”
  • 6 lbs

This e-mail address is being protected from spambots. You need JavaScript enabled to view it for details or questions

Spec

Short Long
Toptube (effective)
22" 23"
Seattube 13.5 13.5"
Chainstay 15.6" 15.6"
Headtube 4.5" 4.5"
Head Angle 70 70
Seattube Angle 73 73
BB Height 12.5" 12.5"
Seatpost Size 27.2mm 27.2mm
Headset Size 1.125" 1.125"
Ft. Drr Size 31.8mm 31.8mm
BB Shell 68mm 68mm

*Angles measured with respect to typical fork travel at 3" / 80mm

Warranty

Contact us for warranty details here: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

Details

Wondering which frame is right for you? What component spec to build with?

Don’t hesitate to contact us with any questions before or after frame purchase.  We are happy to advise you on frame choice, spec, maintenance etc.

Assembly:
We recommend that all assembly be done by an experienced mechanic.  Improper installations, assembly or maintenance can result in a voided warranty.

Care and maintenance:
Steel frames should be coated internally with grease or protective lube like fluid-film.  Seattube, Headtube, and Bottom Bracket should be liberally greased before component installation.

Stylus < Prev
© 2010 Chromag bikes. All Rights Reserved | Contact | Media Login