"When I race or go out with my long-legged friends I want to be right up there with them. I don’t want to get outpaced by the skinny roadie guys on the climbs and I certainly don’t want to get stuck behind them when it comes to the good stuff – the singletrack, the technical, slippery, rough singletrack. I want to be able to pass all those guys with their seat up their asses, holding on for dear life, and get into my groove going down. I’ll watch my bike’s weight but I’m not going to waste a good ride by nursing a wafery bike on the interesting bits of trail. I want a bike that is a lively, race ready weapon that has a supple feel for epic cross-country rides. Sure, I’ll wear Lycra but I’ll still slip on some baggy shorts over the top, and I’m probably going to be closing down the after party."
Light, All Mountain
The Kamui (pronounced Kam-way) is the lightest frame in our lineup but we still left some DNA from our more rugged bikes so it can accommodate stout forks. The Kamui is ready for a broad variety of technical singletrack and weighs in at a svelte 4.5lbs, which still qualifies it as race light. The frames are made in British Columbia in limited productions so contact us for availability and color options.
- Handmade with Chromag custom True Temper andaircraft greade 4130 chromoly
- Chromag's own trail-honed geometry
- 44-millimetre head tube accepts tapered steerer forks
- Optimized for 130 to 150mm travel forks
- 27.2-millimetre seat tube saves weight
- 30mm seat collar
- Ultralight tapered tubing in the rear end
- Slender custom machined steel dropouts
- Available with Chromag’s own removable ISCG mounts by request
- Up to 2.35" tire clearance
- Any color you want
- 4.6 lbs
Making modern chromoly frames is challenging when most of the tubes available on the market are from an era of mountain biking long past. After several years of frame production we reached the point where we could design and produce our own custom tubing for the majority of our frame tubes. This contributes to the unique look of many of our frames but more importantly allows us to configure our bikes exactly as we want for each design.
ISCG tabs are not as necessary for all bikes as they once were but many of our bikes feature our CNC’d 2piece design which is light, and can be removed when not used.
|Chainstay||16.5" / 419mm|
|BB Height||12.75" 324mm|
|Ft. Derailleur Size||28.6mm|
*Angles measured with respect to typical fork travel at 140mm
|TYPICAL RIDER HEIGHT||4'11 -5'3
149 - 158cm
|5'2 - 5'7
156 - 170cm
165 - 178cm
|5'8" - 6'2"
171 - 187cm
|5'11 - 6'3"
180 - 190cm
|TOPTUBE LENGTH (EFFECTIVE)||21.5"
|SEATTUBE LENGTH (C-TOP)||13.5"
|PARTS||GX BUILD||X01 BUILD|
|FORK||Rock Shox REBA 140 SA||Rock Shox REBA 140 SA|
|STEM||Chromag Ranger 60mm||Chromag Ranger 60mm|
|HANDLEBAR||Fubars OSX||Fubars OSX|
|HEADSET||Cane Creek 40||Cane Creek 40|
|BRAKES||SRAM Guide RS||SRAM Guide RSC|
|ROTORS||180mm Centreline||180mm Centreline|
|SHIFTERS||SRAM GX 11 SPD||SRAM X1|
|CASSETTE||SRAM XG-1175 FULL PIN||SRAM XG-1195 X-DOME|
|REAR DERAILLEUR||SRAM GX 1X11 X-HORIZON||SRAM X01 X-HORIZON MED CAGE|
|WHEELSET||Stans Rapid, SRAM MTH||Stans Flow EX. HOPE Hubs|
|TIRES||Schwalbe or Maxxis||Schwalbe or Maxxis|
|SEATPOST||Chromag Dolomite||Chromag Dolomite|
|SADDLE||Chromag Trailmaster DT||Chromag Trailmaster DT|
|GRIPS||Chromag Basis||Chromag Basis|
|CHAIN||SRAM PC-XX1||SRAM PC-XX1|
|FOR REFERENCE ONLY. FORK OPTIONS VARY.|
To purchase, please contact us directly. We are happy to answer all your questions about our bikes and products.